Preparation before driving
Battery replacement steps
1. Use a slotted screwdriver wrapped in cloth to
pry the front trim cover of the key from the
groove ○
A
at the bottom of the smart key to
separate it;
2. Push out the battery and replace it with a new
one:
Recommended battery: CR2032 or equivalent
product.
3. Ensure that the end face of the battery
positive electrode faces the casing side marked
with logo, and install the battery fully into the
battery mounting slot;
4. Refit the smart key body cover and the trim
cover in place;
5. Operate all buttons to check if they work
normally.
You are recommended to have the smart key
battery replaced by the authorized dealer,
because unauthorized replacement operation
may cause damage to the smart key.
Notice for environmental protection
The battery contains pollutants. It
is illegal to discard the battery
with domestic garbage. Battery
materials must be sorted out for
collection and recycled in an
environmentally friendly manner.
Please discard the battery in an
environmentally friendly manner.
Send the dead battery to the
authorized dealer or a special
waste battery recycling station.
To Next Page
Loading...