DongFeng Huge - Page 47

Safe ride
- 47 -
Preparation before driving
1
Information on applicability of ISOFIX child safety seat for different
ISOFIX positions
Weight group
Size class
Anchorage
Seating position (or other location)
Front passenger’s
seat
Left/right rear
seat
Rear center seat
Others
Carry cot
F
ISO/L1
X
X
X
X
G
ISO/L2
X
X
X
X
Group 0: < 10kg
E
ISO/R1
X
IL*
X
X
Group 0+: <13kg
E
ISO/R1
X
IL*
X
X
D
ISO/R2
X
IL*
X
X
C
ISO/R3
X
IL*
X
X
Group I: 9-18 kg
D
ISO/R2
X
IL*
X
X
C
ISO/R3
X
IL*
X
X
B
ISO/F2
X
IUF*
X
X
B1
ISO/F2X
X
IUF*
X
X
A
ISO/F3
X
IUF*
X
X
Group II: 15-25 kg
X
IL*
X
X
Group III: 22-36 kg
X
IL*
X
X
Note 1: When the child restraint system is not marked as per ISOFIX size class (A-G), the vehicle manufacturer shall, for its applicable weight group,
indicate the recommended vehicle-dedicated ISOFIX child restraint system for each seating position.
Note 2: The meanings of uppercase letters in the table are as follows:
IUF - Generic “forward-facing” ISOFIX child safety seat suitable for this weight group (fixed by top tether) are applicable.
IL - Semi-generic ISOFIX child safety seats installed in any one of the ways below are applicable:
- “Rear-facing” child safety seat secured by top tether or supporting leg;
- “Forward-facing” child safety seat secured by supporting leg;
- Infant seat secured by top tether or supporting leg.
X - The child safety seats or baby seats for the indicated weight are not applicable.
*: Be careful when installing the child safety seat with supporting leg, and please refer to the installation instructions provided by the child safety seat
manufacturer. For the installation of the child safety seat, if the child safety seat interferes with the rear seat headrest, the rear seat headrest should be
removed before the child safety seat is installed.