256
c HELP Mode Function and Operation Procedures
chap.7
ABCD Item Setting
0***
Sign flag
Moves to the left by the set
amount of the lower 3 digits.
1***
Moves to the right by the set
amount of the lower 3 digits.
*000
Set amount
Standard (initial value)
Maximum
*001
*010
*011
*100
*101
*110
*111
H-34
(1) Adjustment / specification settingHELP mode
rPress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1)
Scanning start position setting[ Document memory ]
¡
Following items are indicated.
1. Scanning start position [ Document memory ] (Scanner)
2. Scanning start position [ Document memory ] (ADF)
(1)
Scanning start position setting[ Document memory ]
¡During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 213
qAccess HELP mode H-34, and press the PRINT key.
HELP-034
Adjustment
1111
1:
1111
2:
eUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode
: Turn the power switch OFF.
a
To access another HELP mode
:
Enter the desired mode number
using the numeric keys.
tPress the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
Scanner
ADF
wPress the and/or key to select item.
To Next Page
Loading...
Need help?
General