Duplo DUPRINTER DP-430 - Page 281

283
c HELP Mode Function and Operation Procedures
chap.7
H-68
(1) Adjustment / specification settingHELP mode
A B C D
0 0 0 0
0 0 0 1
0 0 1 0
0 0 1 1
0 1 0 0
Setting
OFF
5 minutes
10 minutes
30 minutes
60 minutes
1. Functions
(1) Auto power off / Auto LCD off setting
¡Following items are indicated.
1. Auto power off
2. Auto LCD off
(1) Auto power off / Auto LCD off setting
¡During memorization:
2. Operation procedure
Accessing HELP modes
a See page 213
qAccess HELP mode H-68, and press the PRINT key.
HELP-068
Spec setting
1111
1:
1111
2:
A B C D
- SAVE -
rPress the [=] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,"SAVE" will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
IMPORTANT :
eUse the [0] and [1] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a To exit the HELP mode : Turn the power switch OFF.
a To access another HELP mode : Enter the desired mode number
using the numeric keys.
tPress the STOP key.
The HELP mode selection display will reappear.
wPress the and/or key to select item.
Auto
power off
Auto LCD
off