C
HAPTER
14
| Security Measures
IP Source Guard
– 340 –
new entry will replace the old one and the entry type will be
changed to static IP source guard binding.
â–
Only unicast addresses are accepted for static bindings.
PARAMETERS
These parameters are displayed:
◆ Port – The port to which a static entry is bound.
◆ VLAN – ID of a configured VLAN (Range: 1-4093)
◆ MAC Address – A valid unicast MAC address.
◆ IP Address – A valid unicast IP address, including classful types A, B
or C.
WEB INTERFACE
To configure static bindings for IP Source Guard:
1. Click Security, IP Source Guard, Static Configuration.
2. Select Add from the Action list.
3. Enter the required bindings for each port.
4. Click Apply
Figure 194: Configuring Static Bindings for IP Source Guard
To Next Page
Loading...
Need help?
General