Edge-Core ES3510MA

C HAPTER 18 | Multicast Filtering
Filtering and Throttling IGMP Groups
– 461 –
3. Select Show from the Action list.
Figure 281: Showing the IGMP Filtering Profiles Created
To add a range of multicast groups to an IGMP filter profile:
1. Click Multicast, IGMP Snooping, Filtering.
2. Select Add Multicast Group Range from the Action list.
3. Select the profile to configure, and add a multicast group address or
range of addresses.
4. Click Apply.
Figure 282: Adding Multicast Groups to an IGMP Filtering Profile