Edwards HemoSphere

225
HemoSphere Advanced Monitor G Guidance and Manufacturer’s Declaration
Maximum Transmit
Power
Note:
Maximum
transmits power
varies according to
individual country
regulations. All
values nominal, ±2
dBm
. At 2.4 GHz, a
single spatial stream
and 20 MHz channel
bandwidth is
supported.
802.11a
6 Mbps 15 dBm (31.623 mW)
54 Mbps 12 dBm (19.953 mW)
802.11b
1 Mbps 16 dBm (39.81 mW)
11 Mbps 16 dBm (39.81mW)
802.11g
6 Mbps 16 dBm (39.81 mW)
54 Mbps 12 dBm (25.12 mW)
802.11n (2.4 GHz)
6.5 Mbps (MCS0) 16 dBm (39.81 mW)
65 Mbps (MCS7) 12 dBm (15.85 mW)
802.11n (5 GHz HT20)
6.5 Mbps (MCS0) 15 dBm (31.62mW)
65 Mbps (MCS7) 12 dBm (15.85mW)
Typical Receiver
Sensitivity
Note:
All values
nominal, +/-3 dBm.
Variant by channels.
802.11a
6 Mbps -90 dBm
54 Mbps -73 dBm (PER <= 10%)
802.11b
1 Mbps -89 dBm
11 Mbps -82 dBm (PER <= 8%)
802.11g
6 Mbps -85 dBm
54 Mbps -68 dBm (PER <= 10%)
802.11n (2.4 GHz)
MCS0 Mbps -86 dBm
MCS7 Mbps -65 dBm
802.11n (5 GHz HT20)
MCS0 Mbps -90 dBm
MCS7 Mbps -70 dBm
Security Standards
Wireless Equivalent Privacy (WEP)
*
Wi-Fi Protected Access (WPA)
*
IEEE 802.11i (WPA2)
Encryption
Wireless Equivalent Privacy (WEP, RC4 Algorithm)
Temporal Key Integrity Protocol (TKIP, RC4 Algorithm)
Advanced Encryption Standard (AES, Rijndael Algorithm)
Encryption Key Provisioning
Static (40-bit and 128-bit lengths)
Pre-Shared (PSK)
Dynamic
802.1X Extensible Authentication Protocol Types
EAP-FAST, EAP-TLS, EAP-TTLS
PEAP-GTC, PEAP-MSCHAPv2, PEAP-TLS
LEAP
FIPS 140-2 Mode
Operation restricted to WPA2-AES with EAP-TLS, and WPA2-PSK/AES
*Note: Some of the listed Security Standards might not be enabled by default.
Contact Edwards Technical Support for additional information.
Table G-6 HemoSphere advanced monitor wireless information (continued)
Feature Description
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14