Edwards HemoSphere

64
HemoSphere Advanced Monitor 5 Navigating the HemoSphere Advanced Monitor
Monitor Screen Selection. The monitor screen selection icon allows the user to select the desired number of
monitored parameters displayed and the type of monitoring view used to display them, which is highlighted
in color (see figure 5-3, “Example of monitoring screen selection window,” on page 65). When a monitoring
view screen is selected, that monitoring mode is immediately displayed.
To return to the most recent monitoring screen displayed, touch the cancel icon .
Clinical Actions. The clinical actions icon provides access to the following clinical actions:
• Select Monitoring Mode
• iCO (HemoSphere Swan-Ganz module)
• Zero & Waveform (HemoSphere pressure cable)
• Oximetry Calibration (HemoSphere oximetry cable)
• Enter CVP
• Derived Value Calculator
• Event Review
• Historical Graphical Trends
• Patient CCO Cable Test (HemoSphere Swan-Ganz module)
• Hypotension Probability (HemoSphere pressure cable – advanced feature)
NOTE Hypotension Probability is available if the HPI feature is activated. Activation is only
available in certain areas. See Acumen Hypotension Probability Indicator Software Feature on
page 150. Please contact your local Edwards representative for more information on
enabling this advanced feature.
A description of Select Monitoring Mode, CVP Entry, Derived Value Calculator, Event Review, and
Historical Graphical Trends can be found in this chapter (see Clinical Actions on page 80). For the
remaining clinical actions, refer to the specified module or cable chapter for more information.
Settings. The settings icon provides access to configuration screens which include:
• Patient Data: See chapter 6: User Interface Settings
• Monitor Settings: See chapter 6: User Interface Settings
• Advanced Setup: See chapter 7: Alarms / Targets , chapter 7: Adjust Scales , and chapter 8: Data
Export and Connectivity Settings
• Export Data: See chapter 8: Data Export and Connectivity Settings
• Demo Mode: See chapter 7: Demo Mode
• Engineering: See chapter 7: Engineering
• Help: See chapter 13: On Screen Help
Snapshot. The snapshot icon captures an image of the screen at the current time. A USB stick attached to
one of the two USB ports (rear and right panels) of the HemoSphere advanced monitor is required to save
the image.
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14