Edwards HemoSphere - Page 82

82
HemoSphere Advanced Monitor 5 Navigating the HemoSphere Advanced Monitor
2 To scroll up or down, touch the arrow keys.
3 Touch the home icon to return to the monitoring screen.
The following events are included in the clinical event review log.
Table 5-4 Reviewed events
Event When time logged
Arterial Pressure Zeroed A TruWave pressure transducer is zeroed and the label is ART
Averaging Time – 5 seconds The CO/pressure averaging time changes to 5 seconds
Averaging Time – 20 seconds The CO/pressure averaging time changes to 20 seconds
Averaging Time – 5 minutes The CO/pressure averaging time changes to 5 minutes
BSA Change The BSA value changes from the previous BSA value (including when BSA
goes to/from blank)
Central Venous Pressure
Zeroed
A TruWave pressure transducer is zeroed and the label is CVP
CO Cable Test Passed When the Patient CCO Cable Test was performed and passed
CO Monitoring Started When CO Monitoring is started
CO Monitoring Stopped When the user or system stops CO monitoring
CVP cleared The user has cleared the manually entered CVP value
CVP entered <value><units> A CVP value has been manually entered with the shown value and units
Draw Blood The Draw option is selected in the In vivo Calibration Draw Screen
FloTrac Sensor Zeroed The FloTrac or FloTrac IQ sensor is zeroed
GDT Session Started: #nn A GDT Tracking Session is started. ‘nn’ is the GDT tracking session number
for the current patient
GDT Session Stopped: #nn A GDT Tracking Session is stopped. ‘nn’ is the tracking session number for
the current patient
GDT Session Paused: #nn A GDT Tracking Session is paused. ‘nn’ is the tracking session number for the
current patient
GDT Session Resumed: #nn A GDT Tracking Session is resumed. ‘nn’ is the tracking session number for
the current patient
GDT Session Targets
Updated: #nn;
<pppp>:<qqq><uuu>,<...>
GDT Tracking Session targets are updated. ‘nn’ is the tracking session
number for the current patient, <pppp> is the parameter whose target range
<qqq> with units <uuu> was updated. <...> additional targets were updated
HGB Update Oximetry cable update completes following the HGB update process
iCO Bolus Performed When an iCO bolus is performed
In vitro Calibration When oximetry cable update completes following the In vitro calibration
process
In vivo Calibration When oximetry cable update completes following In vivo calibration process
[IA#N] <sub-type> <detail>
<note>
An intervention analysis is performed where #N is the enumeration of
interventions for this patient
<sub-type> is the intervention sub-type selected (for general Intervention:
Inotrope, Vasodilator, Vasopressor, or PEEP; for Fluid analysis: Red Blood
Cells, Colloid, or Crystalloid; for Position Challenge: Passive Leg Raise or
Trendelenburg)
<detail> is the selected detail
<note> is note added by user
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14