X-STREAM
Emerson Process Management GmbH & Co. OHG 7-51
Instruction Manual
HASAxE-IM-HS
05/2006
7 Maintenance
7-6 Save / Restore Configuration Data Sets
To verify, the saved data on the external device
is not corrupted during transmission, you can
now select Verify! from the SAVE-LOAD..
menu.
Save-Load
CfgData>COMport!
COMport>CfgData..
Verify!
With the external device still connected select
the "Verify!" line and press the ENTER key.
The analyzer now loads the data from the
external device and compares it to the
CfgData. A status screen comes up followed
by a COMMAND EXECUTED screen or an
error message, if the data does not match.
To Next Page
Loading...
