FLIR Detection 5. FLIR identiFINDER R300 Alarms
5.2 Neutron Alarms
Available only for variants equipped with a neutron detector.
The FLIR identiFINDER R300 continuously compares the number of detected neutrons per given
period against thresholds you can specify for warnings and alarms (see 6.35, p. 163).
When a threshold is exceeded, an appropriate warning or alarm is raised and reported visually
(Figure 104, p. 101). The appropriate behavior of the annunciators is detailed in Figure 105, p. 101.
Figure 104. Alarm display: Neutron alarm
Blue LED
Beeper
Vibrator
Blue LED
Beeper
Vibrator
clock
1 s 1 s 1 s
Warning
Alarm
Figure 105. Neutron incidents as announced by the blue LED, beeper, and vibrator
5.3 Sigma Notications
The FLIR identiFINDER R300 continuously monitors the radiation level and uses a smart algorithm
to detect unusual increases. These events are announced as “𝜎 notiication” in the display’s title bar
(Figure 106, p. 102) and, optionally, via beeper and vibrator.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 101
To Next Page
Loading...
