FLIR identiFINDER R300 - Display Settings; Preset Times for Spectrum Data Acquisition

6.9. Display Settings FLIR Detection
Figure 127. Preset times for spectrum data acquisition
Settings and Commands
Real Time
Specify the duration of data acquisition as real time. You can specify durations up to 43200 s
(12 h) or “No Limit”.
Live Time
Specify the duration of data acquisition as live time. You can specify durations up to 43200 s
(12 h) or “No Limit”.
Counts
Specify the number of counts to be acquired. You can specify values from 100 to 9 999 900 in
steps of 100 or “No Limit”.
Down , Select
Choose and select menu items, see 2.2.2, p. 35 for details.
+ , - , Accept , Cancel
Edit values, see 2.2.3, p. 37 for details.
Exit
Return to the superior menu.
6.9 Display Settings
Options Menu (p. 103) ä More Options (p. 103) ä Advanced Options (p. 104) ä General Options (p. 104) ä Display Settings
Settings (p. 180) ä General (p. 184) ä User Interface (p. 186)
This screen groups several options that inluence the display of your FLIR identiFINDER R300 (Fig-
ure 128, p. 123).
122 identiFINDER
®
R300/en/2014.4(13623)/Feb2015