6.9. Display Settings FLIR Detection
Figure 130. Display settings in classic colors
Backlight
Specify the brightness of the display’s backlight in steps between 1 (dim) and 10 (very bright).
Timeout
Specify the duration of user inactivity after which the display backlight is dimmed to save
energy. You can choose from 15 s – 60 s – 5 min – Never.
The backlight draws a signiicant amount of power, you should let it time out while run-
ning on batteries.
After the backlight times out, you can reactivate it by briely pressing any key. At this
moment, the usual functions of short key presses are ignored.
Language
Choose a language to be used for the display.
English
English with American spelling
Deutsch
German
… more languages…
Ensure you understand enough of the language you are changing to. It may be dificult
to change back if you do not understand the menu language.
Key Functions
Choose a mapping of commands to keys to accommodate your personal preferences (Fig-
ures 10–11, p. 33–34).
The actual function of the keys is always displayed on-screen.
124 identiFINDER
®
R300/en/2014.4(13623)/Feb2015
To Next Page
Loading...
