6.14. Show Status FLIR Detection
Figure 137. Removing the password
6.14 Show Status
Options Menu (p. 103) ä More Options (p. 103) ä Advanced Options (p. 104) ä Maintenance (p. 104) ä Show Status
Home (p. 179) ä Info (p. 181) ä System (p. 181)
Settings (p. 180) ä GPS and Clock (p. 186) ä GPS (p. 186)
This command displays various status and version information for your FLIR identiFINDER R300
on several pages (Figures 138–139, p. 131–131).
Settings and Commands
System ⇋ GPS
Step through the status pages.
System
Various information about your FLIR identiFINDER R300 (Figure 138, p. 131).
Serial Number
The serial number of your FLIR identiFINDER R300.
Available Memory
The capacity remaining to store spectra, alarms, screenshots, etc.
You can free memory by erasing all or some of the data (see 6.16, p. 133) if neces-
sary.
Screenshots
The number of screen shots saved in memory.
IP Address
The IP address of your FLIR identiFINDER R300. You need this address to communicate
with the instrument from a computer (see 6.26, p. 152).
130 identiFINDER
®
R300/en/2014.4(13623)/Feb2015
To Next Page
Loading...
