2.2. The FLIR identiFINDER R300 Keys FLIR Detection
2.2 The FLIR identiFINDER R300 Keys
The FLIR identiFINDER R300 is equipped with three keys (Figure 5, p. 26 and Figure 7, p. 28).
The single key at the bottom is the power key
I . It is used to switch the instrument on and off,
to cancel edit operations or return to superior menus.
The other two buttons on the
L left and R right side of the instrument are the main oper-
ating keys. They change their function according to the current mode of operation of the FLIR
identiFINDER R300.
For your convenience, the actual function of these keys in any given situation is displayed in the
bottom part of the screen (Figure 7, p. 28). A detailed description of the keys’ functions under
various circumstances is given in chapter 6, p. 103.
Holding the FLIR identiFINDER R300 with your hand (Figure 10, p. 33), you can, for example, press
one key with your thumb and the other one with your middle inger.
To accomodate to your handedness or your personal preferences (Figure 10, p. 33 and Figure 11,
p. 34), you can swap the function of these keys (6.9, p. 122).
This document refers to the keys and their functions using the “normal” assigment and label
them as
L and R , respectively.
32 identiFINDER
®
R300/en/2014.4(13623)/Feb2015
To Next Page
Loading...
