FLIR identiFINDER R300 - Spectrum Scale: First Half of Spectrum Visible; Spectrum Scale: One Display Pixel Equals the Width of One Spectral Channel

6.2. Spectrum FLIR Detection
Star
t Coordinate
t Coordinate
t Coordinate
of Horizontal Axis
of Horizontal Axis
of Horizontal Axis
End
Coordinate of
Horizontal Axis
Horizontal
Scale
(Zoom)
Figure 117. Spectrum Scale: First half of spectrum visible
Star
t Coordinate
t Coordinate
t Coordinate
of Horizontal Axis
of Horizontal Axis
of Horizontal Axis
End
Coordinate of
Horizontal Axis
Horizontal
Scale
(Zoom)
Figure 118. Spectrum Scale: One display pixel equals the width of one spectral channel
This command clears the current spectrum but does not stop the current acquisition of
data, if any.
Save
Save the current spectrum. The reference number of the saved spectrum will be shown until
you acknowledge it.
If there is not enough free memory to store the spectrum, you will be informed. You can delete
saved spectra (see 6.16, p. 133) if necessary.
Load
Load a saved spectrum.
You can choose from all the saved spectra. While you step through the list, the saving date of
the spectrum is displayed (Figure 120, p. 113) to assist you with making a selection.
112 identiFINDER
®
R300/en/2014.4(13623)/Feb2015