FLIR identiFINDER R300 - Spectrum Scale: the de Ined ROI Its into the Available Screen Width; Choosing a Saved Spectrum to be Loaded for Display

FLIR Detection 6. FLIR identiFINDER R300 Menu Reference
Star
t Coordinate
t Coordinate
t Coordinate
of Horizontal Axis
of Horizontal Axis
of Horizontal Axis
End
Coordinate of
Horizontal Axis
Horizontal
Scale
(Zoom)
Figure 119. Spectrum Scale: The deined ROI its into the available screen width
Figure 120. Choosing a saved spectrum to be loaded for display
To cancel loading a spectrum, press I .
If you load a spectrum while acquiring data, the current spectrum is discarded but the
acquisition is not stopped. That is, fresh data are added to the loaded spectrum.
Identify
Let the FLIR identiFINDER R300 apply its identiication algorithm to the current spectrum.
A list of identiied nuclides, if any, is displayed and saved (Figure 121, p. 114).
Nuclides the identiication algorithm did not recognize or those recognized but having
their visibility suppressed (see 6.5, p. 118) are reported as “Unknown”.
You can specify whether conidence, usage, or severity are shown, see 6.4, p. 116.
Exit
Return to the spectrum display.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 113