FLIR identiFINDER R300 - Identi Ication Result Summary for Sending; Data Transmission Progress

3.6. Sending Results to a Remote Server FLIR Detection
Figure 79. Identiication result summary for sending
Figure 80. Data transmission progress
Ô To pair with a Bluetooth device…
1. Press Start Search (Figure 81, p. 83) to have the FLIR identiFINDER R300 search for suitable
Bluetooth devices.
2. Choose the desired Bluetooth device from the list shown (Figure 82, p. 83) with
Down .
3. To start the pairing with the chosen device, press
Select . Your device might require addi-
tional steps like entering a PIN. Use the PIN shown on your FLIR identiFINDER R300 screen
(Figure 83, p. 83).
4. Your FLIR identiFINDER R300 displays some details about the paired device and is ready to
send data.
82 identiFINDER
®
R300/en/2014.4(13623)/Feb2015