FLIR identiFINDER R300 - Download Settings; Report Settings

6.28. Download Settings FLIR Detection
Figure 168. Report settings
Down , Select
Choose and select menu items, see 2.2.2, p. 35 for details.
+ , - , Accept , Cancel
Edit values, see 2.2.3, p. 37 for details.
Left , Right , Insert , Delete
Edit composite and text values, see 2.2.4, p. 40 and 2.2.6, p. 43 for details.
Exit
Return to the superior menu.
6.28 Download Settings
Options Menu (p. 103) ä More Options (p. 103) ä Advanced Options (p. 104) ä Connectivity Options (p. 104) ä Download Settings
Settings (p. 180) ä Connectivity (p. 190) ä Download Options (p. 192)
This screen (Figure 169, p. 155) lists several ile formats available for transferring recorded data
from the FLIR identiFINDER R300 to a connected computer (8, p. 179). You can accelerate the
downloads by excluding ile types not needed in your worklow. For example, the formats
*.n42 ,
*.spc , and *.spe usually contain the same information in different formats.
Some ile formats are not available for all types of data.
Settings and Commands
.n42 (2012)
Files formatted according to the 2012 edition of the ANSI N42.42 Standard.
154 identiFINDER
®
R300/en/2014.4(13623)/Feb2015