FLIR identiFINDER R300 - Nuclides (Web Page); Bluetooth Settings Web Page

FLIR Detection 8. Using the FLIR identiFINDER R300 Web Server
This web page (Figure 206, p. 193) allows you to enable and conigure the Bluetooth SPP mode.
..
Figure 206. Bluetooth Settings web page
If
..
Enable SPP Protocol is set to
..
On then selecting
.
.
.
Discover Now will make the FLIR
identiFINDER R300 discoverable over Bluetooth for the
..
Discovery timeout period.
..
SPP PIN displays the current PIN for connecting to the FLIR identiFINDER R300 via Bluetooth SPP
mode. The PIN may be edited.
If
..
Enable discovery mode after disconnect is set to
..
Off then discovery of the FLIR
identiFINDER R300 via Bluetooth will be disabled after a connection is terminated.
To transfer your changes to the FLIR identiFINDER R300, click
.
.
.
Save .
You can access these settings on the instrument as well. Please ind the details about the settings
in chapter “FLIR identiFINDER R300 Reference” under
Options Menu (p. 103) ä More Options (p. 103) ä Bluetooth SPP (p. 104) ä Bluetooth SPP Status (p. 141) ä Bluetooth SPP Settings (p. 142)
8.8 Nuclides (Web Page)
Settings (p. 180) ä Nuclides
This web page (Figure 207, p. 194) lets you inspect and change nuclide data.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 193