FLIR identiFINDER R300 - Current Alarm State

FLIR Detection 6. FLIR identiFINDER R300 Menu Reference
6.36 Current Alarm State
Options Menu (p. 103) ä Alarm Options (p. 105) ä Current Alarm State
This screen (Figure 178, p. 165) is identical to the alarm screen always shown when a warning or
an alarm is raised (compare 5, p. 97).
A
vailable only for variants equipped with a
neutron detector.
C
urrent Values
urrent Values
urrent Values
Figure 178. Current Alarm State
Settings and Commands
Mute
Switch off the beeper and vibrator for the current alarm, if any. The next alarm, if any, reac-
tivates sound and vibration.
Exit
Return to the superior menu.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 165