FLIR identiFINDER R300 - Dose Rate Mode

4.1. Dose Rate Mode FLIR Detection
Figure 85. Cycling the manual modes Dose Rate, Finder, and Identiication
Figure 86. While Finder mode is disabled, cycling modes will toggle between Dose Rate and Identiication
modes
4.1 Dose Rate Mode
The Dose Rate Mode is the basic operation mode of the FLIR identiFINDER R300. It is activated
after starting up the instrument.
Alarm
Threshold
Curr
ent Dose Rate
ent Dose Rate
ent Dose Rate
L
ogarithmic Scale
Curr
ent Dose Rate
ent Dose Rate
ent Dose Rate
D
ose Rate Unit
C
urrent Neutron Rate
urrent Neutron Rate
urrent Neutron Rate
Availableonly for variants equipped
Availableonly for variants equipped
Availableonly for variants equipped
with a neutron detector.
with a neutron detector.
with a neutron detector.
Figure 87. Dose Rate mode
86 identiFINDER
®
R300/en/2014.4(13623)/Feb2015