8.6. Connectivity (Web Page) FLIR Detection
You can access these settings on the instrument as well. Please ind the details about the settings
in chapter “FLIR identiFINDER R300 Reference” under
Options Menu (p. 103) ä Alarm Options (p. 105) ä Dose Alarm Thresholds (p. 161)
Options Menu (p. 103) ä Alarm Options (p. 105) ä Dose Rate Alarm Thresholds (p. 162)
8.5.3 Neutron Alarms
This item is available for FLIR identiFINDER R300 variants with a neutron detector (see A.1,
p. 237).
Settings (p. 180) ä Alarm (p. 188) ä Neutron Alarms
This web page section (Figure 204, p. 189) lets you inspect or set the thresholds for neutron alarms
and warnings.
You can access these settings on the instrument as well. Please ind the details about the settings
in chapter “FLIR identiFINDER R300 Reference” under
Options Menu (p. 103) ä Alarm Options (p. 105) ä Neutron Alarm Thresholds (p. 163)
8.6 Connectivity (Web Page)
Settings (p. 180) ä Connectivity
This web page (Figure 205, p. 191) comprises various settings of the FLIR identiFINDER R300 re-
lated to local and remote network connections.
To transfer your changes to the FLIR identiFINDER R300, click
.
.
Save .
8.6.1 Local Area Network
Settings (p. 180) ä Connectivity (p. 190) ä Local Area Network
This web page section (Figure 205, p. 191) lets you conigure the connection of the FLIR
identiFINDER R300 to a local area network.
You can access these settings on the instrument as well. Please ind the details about the settings
in chapter “FLIR identiFINDER R300 Reference” under
Options Menu (p. 103) ä More Options (p. 103) ä Advanced Options (p. 104) ä Connectivity Options (p. 104) ä Network (p. 152)
It is recommended to restart your FLIR identiFINDER R300 after changing network settings.
If the FLIR identiFINDER R300 is currently connected to an external device, you have to
reestablish the connection according to the new settings.
190 identiFINDER
®
R300/en/2014.4(13623)/Feb2015
To Next Page
Loading...
