FLIR identiFINDER R300 - No Bluetooth Devices Detected; Detected SD1000 Device Entry Chosen

FLIR Detection 10. Connecting via Satellite Phone
If the FLIR identiFINDER R300 is unable to detect any compatible Bluetooth devices it
will report ”Search Failed” (Figure 228, p. 224). Ensure the SD1000 LED is still lash-
ing in a triple lash pattern and that the devices are within the maximum range. If the
devices are more than a few meters apart then move them closer, if possible. Select
Search to restart the search for discoverable Bluetooth devices and repeat this step.
Figure 229. No Bluetooth devices detected
7. Once the Search completes with at least one compatible Bluetooth device selected it will
report the identiication screen of all detected devices (Figure 230, p. 225). Choose the
SD1000… device from the list (Figure 230, p. 225) with Down then press Select to pair.
The device names are listed exactly as received from the detected devices and the name
of the SD1000 may differ from what is shown in the screenshot.
Figure 230. Detected SD1000 device entry chosen
8. Choose the Choose 1234 PIN option (Figure 231, p. 226) then press Select to pair.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 225