FLIR identiFINDER R300 - Signals of the Status LED; Status Leds

FLIR Detection 2. Operating the FLIR identiFINDER R300
BOTTOM: Key Descriptions
The ields in this bar name the current function of each of the operating keys
..
L
..
R .
2.1.1 Status LEDs
Several LEDs (Figure 5, p. 26) indicate various status information.
.
.
Red
labeled “G” (short for “Gamma”) indicates dose and dose rate alarms.
.
.
Blue
labeled “N” (short for “Neutron”) indicates neutron counts and alarms.
Available only for variants equipped with a neutron detector.
.
.
Green
indicates the power status (Figure 9, p. 31).
..Instrument Off ..
Running on Battery
..
Running on Low Battery
..
External Power
..
clock
.
1 s
.
1 s
.
1 s
.
1 s
.
1 s
.
1 s
...
Figure 9. Signals of the status LED
You can switch off the red and blue LEDs (6.32, p. 160).
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 31