FLIR identiFINDER R300 - Nuclide Severity; Usage Information in the Nuclide List Used by the Identi Ication Algorithm

6.7. Nuclide Severity FLIR Detection
Figure 125. Usage information in the nuclide list used by the identiication algorithm
Down , Up , Select
Choose and select menu items, see 2.2.2, p. 35 for details.
+ , - , Accept , Cancel
Edit values, see 2.2.3, p. 37 for details.
Exit
Return to the superior menu.
6.7 Nuclide Severity
Options Menu (p. 103) ä More Options (p. 103) ä Identication Options (p. 103) ä Nuclide Severity
Settings (p. 180) ä Nuclides (p. 193)
Built into the FLIR identiFINDER R300 is a library used to identify the nuclides causing gamma ra-
diation. Please refer to Appendix C, p. 259 for further information about the nuclides in this library.
Every nuclide has associated information about its potential danger which you can have shown in
identiication results (Figure 96, p. 93). You can adapt the severity for the nuclides in the library
according to your needs with this command (Figure 126, p. 121).
The severity of some nuclides is ixed. This is indicated by a small padlock symbol.
Settings and Commands
Nuclides…
Choose one from the list of nuclides to edit the associated severity.
I Innocent
120 identiFINDER
®
R300/en/2014.4(13623)/Feb2015