6.22. Send Spectrum FLIR Detection
Figure 149. Sending Data: Mission accomplished
6.22 Send Spectrum
This item is available for FLIR identiFINDER R300 variants with Bluetooth (see A.1, p. 237).
Options Menu (p. 103) ä More Options (p. 103) ä Advanced Options (p. 104) ä Connectivity Options (p. 104) ä Send Data (p. 104) ä Send
Spectrum
This command initiates a multi-step procedure to send a spectrum stored in the FLIR
identiFINDER R300’s database to a remote server (see 9, p. 219).
The procedure is the same as that for sending identiication results. The description of the
procedure is not repeated here, please refer to section 6.21, p. 137.
The only difference is in the contents of the ile sent. You can choose from the results available in
the database (Figure 150, p. 141). The date and time of saving the result is displayed while you step
through the available records.
If you entered this command from the spectrum display (see 6.2, p. 106), the correct spectrum
is already chosen.
A summary of the chosen record is shown (Figure 151, p. 141) so you can verify your choice and
choose another one if necessary.
Please refer to section 6.21, p. 137 for a description of the remaining steps to send data to a remote
server.
140 identiFINDER
®
R300/en/2014.4(13623)/Feb2015
To Next Page
Loading...
Need help?
General
