FLIR identiFINDER R300 - Backup Web Page

FLIR Detection 8. Using the FLIR identiFINDER R300 Web Server
..
Figure 208. Backup web page
The instrument’s settings are saved in an *.xml ile. You can inspect or edit this ile with common
text editors supporting UTF-8 or with specialized XML editors.
The settings in the ile are grouped into several categories and embedded comments help you ind
your way around.
1 <?xml version=”1.0” encoding=”utf-8”?>
2 <settings modelnumber=”nanoRaider ZH” serialnumber=”103156000000”>
3 <category name=”Display”>
4 ...
5 </category>
6 <category name=”Alarm Indications”>
7 <!--Are warnings and alarms reported by the beeper?-->
8 <setting name=”SoundAlarmIndication” value=”True” />
9 <!--Are warnings and alarms reported by the vibrator?-->
10 <setting name=”VibratorAlarmIndication” value=”True” />
11 <!--Are warnings and alarms reported by LEDs?-->
12 <setting name=”LightsAlarmIndication” value=”True” />
13 </category>
14 <category name=”Feedback”>
15 ...
16 </category>
17 <category name=”Nuclide”>
18 <setting name=”Ag-110m” value=”True” />
19 <setting name=”Ag-110m-Usage” value=”IND” />
20 <setting name=”Ag-110m-Severity” value=”Innocent” />
21 <setting name=”Am-241” value=”True” />
to be continued…
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 195