FLIR Detection 6. FLIR identiFINDER R300 Menu Reference
Figure 138. FLIR identiFINDER R300 status display: System
Software
The version of the software.
GPS Your current location determined from the GPS data received by the FLIR identiFINDER R300
(Figure 139, p. 131).
Figure 139. FLIR identiFINDER R300 status display: GPS
The GPS status data are shown only if the GPS receiver is switched on (see 6.11, p. 127).
Satellites
The number of satellites currently “visible” to the FLIR identiFINDER R300. The more
satellites, the better the precision of the location data.
If this number drops below 3, the given location is invalid. It is either the most re-
cent valid location, or, if there was no valid location since you switched on the FLIR
identiFINDER R300, the intersection of the Greenwich meridian and the equator.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 131
To Next Page
Loading...
