FLIR identiFINDER R300 - Bluetooth; Bluetooth SPP Status; Sending Data: Choosing a Spectrum; Sending Data: Spectrum Summary

FLIR Detection 6. FLIR identiFINDER R300 Menu Reference
Figure 150. Sending Data: Choosing a spectrum
Figure 151. Sending Data: Spectrum summary
6.23 Bluetooth
This item is available for FLIR identiFINDER R300 variants with Bluetooth (see A.1, p. 237).
The FLIR identiFINDER R300 supports two Bluetooth modes: Bluetooth Serial Port Protocol (SPP)
and Bluetooth Periphery. While Bluetooth SPP Mode is enabled, Bluetooth Periphery Mode is dis-
abled. Bluetooth SPP Mode supports a command set (see A.6, p. 245) for system integrators to
develop custom remote interfaces. These two modes are described in the following sections.
6.23.1 Bluetooth SPP Status
This item is available for FLIR identiFINDER R300 variants with Bluetooth (see A.1, p. 237).
Options Menu (p. 103) ä More Options (p. 103) ä Bluetooth SPP (p. 104) ä Bluetooth SPP Status
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 141