FLIR identiFINDER R300 - Nuclide Visibility

6.5. Nuclide Visibility FLIR Detection
..
Usage
Specify if you want the usage of an identiied nuclide shown or hidden in identiication results
(for details refer to 6.6, p. 119 or C, p. 259).
..
Severity
Specify if you want the severity of an identiied nuclide shown by icons or hidden in identii-
cation results (for details refer to 6.7, p. 120 or C, p. 259).
..
I Innocent
..
S Suspicious
..
T Threatening
..
U, Pu
Specify whether all uranium isotopes and all plutonium isotopes, respectively, should be
identiied together as element (uranium) or separately as nuclides (
235
U,
238
U, etc.).
..
Down ,
..
Select
Choose and select menu items, see 2.2.2, p. 35 for details.
..
+ ,
..
- ,
..
Accept ,
..
Cancel
Edit values, see 2.2.3, p. 37 for details.
..
Exit
Return to the superior menu.
6.5 Nuclide Visibility
Options Menu (p. 103) ä More Options (p. 103) ä Identication Options (p. 103) ä Nuclide Visibility
Settings (p. 180) ä Nuclides (p. 193)
Built into the FLIR identiFINDER R300 is a library used to identify the nuclides causing gamma ra-
diation. Please refer to Appendix C, p. 259 for further information about the nuclides in this library.
You can specify which nuclides should be included in the display of identiication results (Fig-
ure 124, p. 119).
Settings and Commands
..
Nuclides…
Choose one from the list of nuclides to specify whether you want it to be shown or suppressed
in identiication results.
Suppressed nuclides are reported as “Unknown” if recognized by the identiication algorithm.
..
Skip
Cycle the list of commands (see 2.2.1, p. 35).
118 identiFINDER
®
R300/en/2014.4(13623)/Feb2015