FLIR Detection 6. FLIR identiFINDER R300 Menu Reference
Figure 165. Starting the USB mass storage mode
Settings and Commands
Start
Start the USB mass storage mode (Figure 166, p. 151).
Figure 166. The FLIR identiFINDER R300 in USB mass storage mode
All of the FLIR identiFINDER R300 network services will stop and after a few moments the
FLIR identiFINDER R300 will be recognized as an external hard disk by the connected com-
puter. Use the ile manager of your computer to inspect, for example, the drivers on the FLIR
identiFINDER R300.
While the FLIR identiFINDER R300 acts as a hard drive, you cannot operate it. Rou-
tine jobs like monitoring the radiation for exceeding the alarm thresholds are not inter-
rupted.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 151
To Next Page
Loading...
