7.3. Preparing the USB Network Connection on a Computer FLIR Detection
2. Proceed to the following page (Figure 190, p. 174) by clicking Next .
Figure 190. Specifying a driver source
3. Click Install the software automatically (Recommended) to have the system search for the driver
you installed as described above.
4. Proceed to the following page by clicking
Next .
5. You might get asked whether to install this software (Figure 191, p. 174).
Please click
Continue Anyway .
Figure 191. Installation warning
174 identiFINDER
®
R300/en/2014.4(13623)/Feb2015
To Next Page
Loading...
