FLIR identiFINDER R300 - General Error Format

A.6. Bluetooth Serial Port Prole (SPP) Communication Overview FLIR Detection
name
What
Property child elements will be present are determined by the name attribute,
shown in the example with the (CommandName) placeholder value. Update messages
will contain the same (CommandName) as the command message they are in response
to.
type The type attribute indicates the device class sending the message. For the FLIR
identiFINDER R300 this will be
”nanoRaider” .
id The id attribute, shown in the example with the (SerialNumber) placeholder, will con-
tain the unique serial number of the FLIR identiFINDER R300 sending the message.
The id attribute value may contain non-numerical characters. For example, the
serial number may contain a dash.
Line 3
An Update message may contain zero, one or multiple Property elements as children to the
root element.
Property elements will normally have have two or three attribute speciica-
tions in the form of attribute name, attribute value pairs.
name
Each Property element will have a name attribute, shown in the example with the
(PropertyName) placeholder value.
value
Each Property element will also have a value attribute, shown in the example with
the
(PropertyValue) placeholder value.
units Some Property elements will also have a units attribute, shown in the example with
the
(PropertyUnits) placeholder value.
Line 4
The ellipsis in this example are not part of the actual message and serve to indicate additional
Argument elements may be allowed for an Update message.
Line 5
The root Update element is closed, completing the XML portion of the message.
The message is then terminated with the
NUL character at the end of line 5. This is not part of
the XML speciication, but is required by the FLIR identiFINDER R300 as a message delimiter.
A.6.6 General Error Format
Error messages sent from the FLIR identiFINDER R300 will be of the following general format:
Listing A.3. General Error Format
1 < ? xml version= ”1.0” encoding=”utf -8”?>
248 identiFINDER
®
R300/en/2014.4(13623)/Feb2015