FLIR identiFINDER R300 - Bluetooth SPP

FLIR Detection 6. FLIR identiFINDER R300 Menu Reference
Figure 153. Bluetooth SPP
Settings and Commands
Enable SPP
When set to On the FLIR identiFINDER R300 will attempt to connect in SPP mode using the
Bluetooth SPP settings. If set to Off, then Bluetooth Periphery mode can be enabled (see
6.23.3, p. 144).
Timeout
Specify the maximum elapsed time during which the FLIR identiFINDER R300 will be discov-
erable after discovery is initiated. You can specify values from 0 s to 100000 s. A value of 0 s
will disable discovery timeout.
Disconnect
This speciies how the FLIR identiFINDER R300 should conigure the Bluetooth SPP Mode
after a Bluetooth connection is lost.
Discover
If a Bluetooth SPP connection is lost, the FLIR identiFINDER R300 will enable Discovery
for the speciied timeout period.
Off If a Bluetooth SPP connection is lost, the FLIR identiFINDER R300 will disable Blue-
tooth.
Down , Select
Choose and select menu items, see 2.2.2, p. 35 for details.
+ , - , Accept , Cancel
Edit values, see 2.2.3, p. 37 for details.
Exit
Return to the superior menu.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 143