7.3. Preparing the USB Network Connection on a Computer FLIR Detection
Figure 185. Beginning of the installation
Figure 186. Installation warning
6. Stop the mass storage connection from the FLIR identiFINDER R300 to your computer (see
7.2, p. 170).
Whenever you connect a computer and a FLIR identiFINDER R300 which is not in the USB mass
storage mode, the FLIR identiFINDER R300 identiies itself as an RNDIS device. A computer running
Microsoft Windows XP detecting the device checks whether the device is known and will report the
detection of new hardware if not (Figure 188, p. 173).
172 identiFINDER
®
R300/en/2014.4(13623)/Feb2015
To Next Page
Loading...
