FLIR identiFINDER R300 - Presets; Severity Information in the Nuclide List Used by the Identi Ication Algorithm

FLIR Detection 6. FLIR identiFINDER R300 Menu Reference
L
ocked Seing
Figure 126. Severity information in the nuclide list used by the identiication algorithm
S Suspicious
T Threatening
Skip
Cycle the list of commands (see 2.2.1, p. 35).
Down , Up , Select
Choose and select menu items, see 2.2.2, p. 35 for details.
+ , - , Accept , Cancel
Edit values, see 2.2.3, p. 37 for details.
Exit
Return to the superior menu.
6.8 Presets
Options Menu (p. 103) ä More Options (p. 103) ä Presets
This screen (Figure 127, p. 122) groups options that inluence the data acquisition for spectra (6.2,
p. 106).
You can stop the data acquisition for spectra manually or have it stop automatically after a duration
or a number of counts you specify here.
You can preset either one of these limits. If you try to enter a second preset, the others will
be set to “No Limit”.
Preset limits remain in effect until you change them or switch off your FLIR
identiFINDER R300.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 121