FLIR identiFINDER R300 - The FLIR Identifinder R300 Display; Anatomy of the FLIR Identifinder R300 Display

FLIR Detection 2. Operating the FLIR identiFINDER R300
2.1 The FLIR identiFINDER R300 Display
The FLIR identiFINDER R300 display (Figure 7, p. 28) is a color LCD screen divided into three prin-
ciple areas (Figure 8, p. 29):
TOP: Title and Status Bar
This area contains a brief title of the currently performed operation or the current mode the
instrument is switched to and some icons representing the status of several components of
the instrument.
When a warning or an alarm is raised, the alarm information is shown alternating with the
title (see, for example, Figure 100, p. 98).
T
itle and Status Bar
Main
Display Area
Key
Descriptions
Ener
gy Saving Options
GPS
Status
D
ate, Time
S
creen Title,Alarm Info
B
aery Status
Figure 8. Anatomy of the FLIR identiFINDER R300 display.
The power indicator and the title are grouped in the left part of the bar.
Full battery
Empty or no battery
Triangles symbolize the connection to an external power supply. This information is
also shown by a green LED (see 11.2, p. 230).
A segment lickers while the battery is being charged.
The current date and time and indicators for the GPS receiver and the energy saving op-
tions are grouped in the right part of the title bar.
19 Feb, 14:10
The current local date and time are shown as day, month, hours (24-hour notation) and
minutes.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 29