FLIR identiFINDER R300 - Send Identi Ication; Sending Data: Choosing a Record of Identi Ication Results

FLIR Detection 6. FLIR identiFINDER R300 Menu Reference
Down , Select
Choose and select menu items, see 2.2.2, p. 35 for details.
+ , - , Accept , Cancel
Edit values, see 2.2.3, p. 37 for details.
Exit
Return to the superior menu.
6.21 Send Identication
This item is available for FLIR identiFINDER R300 variants with Bluetooth (see A.1, p. 237).
Options Menu (p. 103) ä More Options (p. 103) ä Advanced Options (p. 104) ä Connectivity Options (p. 104) ä Send Data (p. 104) ä Send
Identication
This command initiates a multi-step procedure to send a record of identiication results stored in
the FLIR identiFINDER R300’s database to a remote server (see 9, p. 219).
The procedure to send identiication results is the same as that for sending spectra. The only
difference is in the contents of the ile sent. This description applies to both this and the Send
Spectrum command (see 6.22, p. 140).
You can choose from the identiication results available in the database (Figure 145, p. 137). The
date and time of saving the identiication is displayed while you step through the available data.
Figure 145. Sending Data: Choosing a record of identiication results
If you entered this command from the Identiication Mode (see 4.3, p. 90) or the spectrum
display (see 6.2, p. 106), the correct record is already chosen.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 137