FLIR Detection 1. Welcome
...
A
.
B
.
C
.
D
.
E
.
E
.
E
.
F
.
G
.
H
Figure 1. The FLIR identiFINDER R300 with accessories
..
D Wall power adapter with USB-A receptacle
..
E International adapters for power adapter (US, Euro, UK)
..
F Car power adapter with USB-A receptacle
..
G Mini USB-B to USB-A cable for connection to local computer or power adapter (USB 2.0)
..
H CD-ROM with manual and drivers
..
I Pelican case
Review the parts and components received. In the event that a component cannot be located con-
tact the appropriate support organization (see Chapter B.4, p. 257).
A name plate (Figure 3, p. 23) is attached to the rear side of the instrument. It lists the type of
instrument, the serial number and other important information.
You might want to remember the serial number. It is sometimes used to identify the FLIR
identiFINDER R300 in a computer network.
After the initial charge, the FLIR identiFINDER R300 is ready for use.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 21
To Next Page
Loading...
