FLIR identiFINDER R300 - Chapter 4 FLIR identiFINDER R300 Modes

FLIR Detection 4. FLIR identiFINDER R300 Modes
Chapter 4
FLIR identiFINDER R300 Modes
This chapter provides detailed descriptions of the FLIR identiFINDER R300’s essential measuring
modes for day-to-day procedures.
Dose Rate Mode
Observe the ambient radiation (see 4.1, p. 86)
Finder Mode
Locate radiation sources (see 4.2, p. 88)
Identication Mode
Identify radiating nuclides (see 4.3, p. 90)
Automated Mode
Have the unattended instrument identify radiating nuclides at predeined time intervals (see
4.4, p. 93)
Remotely Controlled Spectrum Acquisition
Acquire spectra via the web interface (see 4.5, p. 95, 8.16, p. 209)
The alarms overriding all other modes and commands are detailed in Chapter 5, p. 97.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 85