FLIR identiFINDER R300 - Nuclide Usage; Top of the Nuclide List Used by the Identi Ication Algorithm

FLIR Detection 6. FLIR identiFINDER R300 Menu Reference
Figure 124. Top of the nuclide list used by the identiication algorithm
Down , Up , Select
Choose and select menu items, see 2.2.2, p. 35 for details.
+ , - , Accept , Cancel
Edit values, see 2.2.3, p. 37 for details.
Exit
Return to the superior menu.
6.6 Nuclide Usage
Options Menu (p. 103) ä More Options (p. 103) ä Identication Options (p. 103) ä Nuclide Usage
Settings (p. 180) ä Nuclides (p. 193)
Built into the FLIR identiFINDER R300 is a library used to identify the nuclides causing gamma ra-
diation. Please refer to Appendix C, p. 259 for further information about the nuclides in this library.
Every nuclide has associated information about its occurrence or ield of application which you can
have shown in identiication results (Figure 96, p. 93). You can adapt the usage for all the nuclides
in the library according to your needs with this command (Figure 125, p. 120).
Settings and Commands
Nuclides…
Choose one from the list of nuclides to edit the associated usage (see C, p. 259).
Skip
Cycle the list of commands (see 2.2.1, p. 35).
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 119