FLIR identiFINDER R300 - Page 196

8.9. Backup (Web Page) FLIR Detection
22 <setting name=”Am-241-Usage” value=”IND” />
23 <setting name=”Am-241-Severity” value=”Threatening” />
24 ...
25 <setting name=”Xe-133” value=”True” />
26 <setting name=”Xe-133-Usage” value=”MED” />
27 <setting name=”Xe-133-Severity” value=”Innocent” />
28 </category>
29 </settings>
You can use this ile, for example, to
• backup the settings and restore them after you experiment with various settings on the in-
strument,
• document the settings used in your team, or
• distribute identical settings to several instruments used in your team.
Uploaded settings iles may be incomplete, that is, they may contain only some settings. Using
this method, you can distribute some settings to several instruments while other settings
remain unchanged on the individual instrument.
..
Backup
The name of a settings ile starts with the serial number of the instrument.
.
.
.
… Settings.xml
Download the settings ile to your computer.
..
Restore
Specify a settings ile to be uploaded to your FLIR identiFINDER R300.
.
.
.
Settings File […]
Enter the path to the settings ile.
.
.
.
Browse…
Use your computer’s standard method to choose a settings ile.
.
.
.
Upload
Transfer the ile to the FLIR identiFINDER R300.
The software of the FLIR identiFINDER R300 will check the formal integrity of the ile
you uploaded.
If the uploaded ile contains, for example, syntax errors or unknown settings, the
complete ile will be rejected and the settings of the instrument will remain un-
changed.
In other words: you cannot damage the FLIR identiFINDER R300 by uploading a wrong
or corrupt ile. You can, however, upload a ile with settings making no sense for your
ield of application.
196 identiFINDER
®
R300/en/2014.4(13623)/Feb2015