9.1. Internet Connection FLIR Detection
Entering these values is much more convenient via the web interface (see 8, p. 179).
Ô
To prepare for sending data…
These steps are required before actually sending data for the irst time after you switch
on your FLIR identiFINDER R300.
1. Place you cell phone in the vicinity of your FLIR identiFINDER R300.
2. Pair your cell phone with the FLIR identiFINDER R300 (see 6.23.3, p. 144).
All the settings mentioned above are necessary to send data to a remote server. If any item is
missing, you will be prompted to enter it when you actually want to send data.
222 identiFINDER
®
R300/en/2014.4(13623)/Feb2015
To Next Page
Loading...
