FLIR Detection 2. Operating the FLIR identiFINDER R300
Ô To reset the FLIR identiFINDER R300…
1. Shut down the instrument (2.6, p. 64)
Should a reset be necessary because the instrument does not react to your input any-
more, you might have to use the forced shut down procedure described in section 2.6,
p. 64.
2. Start up the instrument (2.5, p. 62).
identiFINDER
®
R300/en/2014.4(13623)/Feb2015 67
To Next Page
Loading...
