Figure 34: Connecting the cables
▶
Connect all cables to the power distribution board.
Concluding steps
▶
Install the second PSU, see "Installing a hot-plug PSU" on page
105.
▶
"Installing the crossbar" on page
63.
▶
"Installing the air duct" on page 59.
▶
"Reassembling" on page 51.
▶
"Connecting the power cord" on page 56.
▶
"Switching on the server" on page 57.
▶
"Resuming BitLocker functionality" on page 88.
Power supply unit (PSU)
116 Upgrade and Maintenance Manual RX2520 M5
To Next Page
Loading...
