▶
Remove the TPM screw (3).
▶
Remove the TPM on the upper side of the system board.
Figure 261: Removing the TPM spacer
▶
Using a flat nose pliers, press together the hooks on the TPM spacer and
remove it from the system board.
If the TPM is to be replaced, the TPM spacer may remain on the
system board.
▶
Install the system board, see "Installing the new system board" on page 428
.
Concluding steps
▶
"Installing the crossbar" on page 63.
▶
"Installing the fan holder" on page 61.
▶
"Installing the air duct" on page 59.
▶
"Reassembling" on page 51.
▶
"Connecting the power cord" on page 56.
▶
"Switching on the server" on page 57.
▶
"Resuming BitLocker functionality" on page 88.
System board and components
398 Upgrade and Maintenance Manual RX2520 M5
To Next Page
Loading...
