Chapter 10: Set Preferences
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 10-4
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure 10-3 Add Network Host – Host tab
Table 10-1 Add Network Host – Hosts tab description
Function Description
Host Label The name of the host that appears in the Network Hosts lists and on the
Image Management screen.
NOTE: Host labels cannot have spaces in the name. Use underscores
( _ ) to separate words.
Application Entry Title The DICOM application title.
IP Address The IP address of the network host.
Port Number The port number for the network host.
Query Retrieve Sets the type of information the host will provide on query from another
host.
Available options are:
•No provider
•Study
•Patient
Storage Commitment Designates if the host will store image data.
Storage Commitment -
Application Entry Title
The DICOM application title.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
