Chapter 5: Worklist
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 5-14
Operator Manual © 2008 General Electric Company. All rights reserved.
Delete Suspended Procedures
Suspended procedures cannot be deleted unless their status is changed to “Completed” or
“Discontinued”
1. Select the suspended procedure to delete.
A message appears: “The patient entry you are trying to delete is still in progress. Would you like to
mark the patient as ‘Completed’ / ‘Discontinued’ and proceed with deletion?”
2. Press [COMPLETE] or [DISCONTINUE].
[COMPLETE] changes the Status to of the procedures to “Completed.” If enabled, any acquired
images are auto pushed, auto printed, and sent to PACS.
[DISCONTINUE] changes the Status to “Discontinued.” Any acquired images are marked as
Discontinued and the information is sent to PACS.
[CANCEL] closes the message and returns you to the Worklist without deleting procedures.
The procedures are removed from the Worklist.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
