Chapter 4: General Information
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 4-9
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure 4-10 Message Log
iLinq
iLinq is an optional feature of your system that allows access to remote service and clinical applications
support.
The iLinq system lets authorized Service Engineers and Applications Specialists, located at GE
Healthcare’ Service Support Centers, access X-ray systems (with your permission) to provide the
following services:
• Faster Emergency Service response
• Customer Applications training and assistance
• System troubleshooting and diagnostics
• Accumulate system information for failure analysis, resolution and prediction to assist in maintaining
optimal X-ray system performance
Figure 4-11 iLinq Main Screen
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
